Incorrect Adjustment of LED Headlights/FMVSS 108 – 2019 Maserati Levante

“This site contains affiliate links for which OEMDTC may be compensated”

July 11, 2019 NHTSA CAMPAIGN NUMBER: 19V521000

Incorrect Adjustment of LED Headlights/FMVSS 108

Affecting the visibility of oncoming traffic can increase the risk of a crash.

 

NHTSA Campaign Number: 19V521

Manufacturer Maserati North America, Inc.

Components EXTERIOR LIGHTING

Potential Number of Units Affected 427

 

Summary

Maserati North America, Inc. (Maserati) is recalling certain 2019 Levante vehicles equipped with full LED headlights with Adaptive Front Lighting System (AFLS). The headlights may be misadjusted above the maximum height allowed, possibly impairing other driver’s visibility on the roadway. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”

 

Remedy

Maserati will notify owners, and dealers will adjust the headlights, free of charge. The recall began August 20, 2019. Owners may contact Maserati customer service at 1-877-696-2737. Maserati’s number for this recall is 387.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Maserati has a Recall

 


Date: July 29, 2019
Bulletin Number: MAS001935 – MTB -1914 /A
Recall 387 – LED Headlight Adjustment
Supersedes: N/A
Section: Compliance

Model Type: Levante (M161)
Model Year: 2019
Subject: Vehicle Safety Recall Campaign 387, LED Headlight Adjustment

NOTE:  Some vehicles above may have been identified as not involved in this  recall and therefore have been excluded from this recall. 

NOTE: Before starting this procedure, you MUST read these instructions carefully and completely.

 

MASERATI SAFETY RECALL NOTIFICATION

PERFORM THE PROCEDURE OUTLINED IN THIS TECHNICAL BULLETIN ON ALL AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THE CAR IS IN THE SHOP FOR MAINTENANCE OR REPAIRS.

Maserati dealers must ensure recalls are completed after having been notified by Maserati North America, Inc. (MNA) that a safety-related defect or noncompliance exists in any motor vehicle or item of replacement equipment in the dealer’s possession at the time of notification.  In MNA’s case, this notification would typically be made by the issuance of a recall notification in the form of a Technical Bulletin. 

Some of the involved vehicles may be in dealer new vehicle inventory.  The National Traffic and Motor Vehicle Safety Act of 1966, as amended (or in the case of Canadian vehicles, Motor Vehicle Safety Act S.C. 1993, as amended), requires you to complete this recall service on these vehicles before retail delivery. This means that dealers cannot legally deliver new motor vehicles or new items of replacement equipment to consumers with an open recall.

Dealers should also consider this requirement to apply to used vehicle inventory and should perform this recall on vehicles in for service.  This also pertains to vehicles in the Certified Pre-Owned program, and to items of replacement equipment. 

Finally, MNA dealers should not sell or use parts that have been recalled by MNA.  Please follow the specific instructions provided by MNA on the return or disposition of the parts.   

 

Description of Vehicle Safety Recall 387

Maserati S.p.A., MNA and MC have determined that the above described vehicles equipped with the optional full LED headlights with Adaptive Front Lighting System (“AFLS”) did not have the AFLS properly adjusted during the vehicle assembly process.  Headlights adjusted above the maximum gradient allowed may impair the vision of drivers of other vehicles, and can cause a vehicle crash without prior warning.   Out of an abundance of caution, Maserati has decided to initiate this Voluntary Safety Recall #387 to adjust the AFLS properly (Fig.1).

 

Fig.1

 

This repair procedure will be performed free of charge to the customer.

 

Which Vehicles Are Affected

Please refer to the VIN List in ModisCS+ for the affected vehicles in the U.S. and Canada.

 

Vehicle Remedy Information

  1. Check that the vehicle is included in this Recall Campaign, and that the repair has not been previously performed.
  2. Perform the adjustment procedures to the “AFLS” LED Headlights as shown below and in Section 8.30.002.40 of the Workshop Manual.
  1. The recall procedure is now complete.

 

Parts Needed For The Recall

No parts are required for this Recall Campaign.

IMPORTANT NOTES: Before beginning the headlight adjustment procedures, ensure the Headlight alignment tool p/n: 900000527 has been set up and registered on line as explained in Maserati Tech Tips 92.

Ensure the calibration date is set correctly on the tool by referring to MAS001600 (MCL 18-01) and MAS001638 (MCL 18-08).

When setting the tool up for use, refer to MAS001810 (MCL 19-07) for clarification on the inclination adjustment.

 

OPERATING PROCEDURES

Test area floor

  1. The slope of the test area floor (longitudinally as well as laterally) may not exceed 1%.
  2. The maximum accepted unevenness of the test area is 2mm/m.

 

Vehicle preparation

First check proper operation of the lamps and turn indicators.

Make sure that headlight mounts are not broken and that headlight surface is free of any cracks.

Position the vehicle on a level surface .

Using suitable products, clean headlight surface .

Standard “AERO 1”: it corresponds to vehicle in “Wheel alignment mode”. Launch the “Wheel alignment mode” from MD by selecting the SPECIFIC FUNCTION OF DASM, or enter it in the MTC+.

  1. The car must be in this condition: Standard “AERO 1”
  1. Perform a pressure check on the tires and, if necessary, inflate them to the correct pressure for Full load condition [Front – Rear 2.6 bar (38 psi) ].
  2. Straighten wheels and set the steering wheel straight.

 

Tool positioning

The images shown here are for illustrative purposes only.

  1. The headlight adjustment tool 900000527, must be positioned at a distance ranging between 30 – 50 cm from headlight as figured .

 

  1. Select TEST SAE.

 

  1. Select the option “Free Test”.

 

  1. Set the parameters as shown in the picture below, then switch-on the laser as indicated

 

Use the buttons +/- to change the parameters value.

*Note SAE requires measurement in standard unit. Conversion from metric units may be required. 

 

  1. Select the  option “NO” in the  screen concerning  the “Fog  lights”.

 

  1. Find the center of the  headlamp by moving the
  2. A laser cross is projected onto the headlamp for centering.

 

  1. After adjusting the height of the tool so It’s centered in the headlight, make note of the measurement on the scale.

 

  1. Using the level on the tool, perform the levelling.

 

  1. If not correctly levelled, perform the tool adjustment by using the height-adjustable wheels.  Slightly loosen the 2 wheel knobs (1). Adjust the level of the tool by turning the 2 adjusting knobs (2). Check the spirit level and, when the bubble is levelled, tighten the wheel knobs (1).

 

  1. Switch-on the alignment laser and search for two symmetrical parts at the front area of the vehicle.
  2. Turn the plug with the light box, until the line projected by the alignment laser on the engine bay perfectly matches the two symmetrical reference points.

 

  1. For example 2 symmetrical screws in the engine bay on the right and left sides as shown below.

 

  1. Verify that the laser cross is still in the center of the headlamp, if not reposition the laser cross into the center of the headlamp.

The selection keys for the headlamps to be tested are always in the   driving direction of the vehicle. This means that the selection keys are laterally reversed in the settings mode. The labelling of the headlamps (left and right) do not change.

After entering the vehicle settings, the screen for the selection of the headlamp to be tested appears.

 

  1. Click onto the symbol for the low beam headlamp to be tested (left or right).

 

  1. Switch on the low beams of the vehicle, then press the start measurement symbol as shown below to start the test.

 

  1. The screen shows the status of the headlamp: outside top tolerance, outside bottom tolerance. ►, outside right tolerance. ◄ outside left tolerance

 

  1. A red dot indicates that the headlamp is not centered Your goal is to aim the beam into the dotted square displayed on the screen.

 

  1. The screw positions to adjust the headlights are depicted below.

                             

  1. Using the vertical and horizontal adjustment screws. Adjust beam until dot enters the dotted square depicted on the screen. Correct adjustment is indicated by a green dot as seen below.

 

  1. When adjustment is complete confirm by pressing the “SAVE” button.

 

  1. Repeat procedure on the opposite headlight to be adjusted.
  2. Ensure to printout results and attach results provided by beam setter to the repair order.

 

Entering A Warranty Claim

Warranty Information:

  • Campaign Number………………………………………387
  • Cost Code………………………………………………..24
  • Defect Code………………………………………….….063
  • Component code………………………………………..8.30.002
  • Labor Operation Code……………..…………………..8.30.002.9 (0.55h)

 


IMPORTANT SAFETY RECALL INFORMATION

 

August 23, 2019

NHTSA Recall#: 19V521
Maserati Campaign#: 387

 

<<First>> <<Last>>
<<ADD1>>
<<ADD2>>
<<CITY>>, <<ST>> <<ZIP>>

 

This Notice Applies To Your Vehicle, Vehicle Identification Number:

Dear Maserati Customer:

This notification is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Maserati S.p.A. and Maserati North America, Inc. (MNA), have decided that certain 2019 Maserati Levante vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108, “Lamps, Reflective Devices, and Associated Equipment”.

Maserati S.p.A. and MNA have determined that the above-described vehicles were manufactured with the optional full LED headlights with Adaptive Front Lighting System (AFLS) that may not have had the AFLS properly adjusted during the vehicle assembly process. Headlights adjusted above the maximum height allowed under FMVSS No. 108 may impair the vision of drivers of other vehicles, and may increase the risk of a vehicle crash without prior warning.

Your Maserati Dealer will adjust the light beam to the corrected parameters, free of charge. Since your vehicle is among those that may be affected by the above condition, we ask you to contact any Authorized Maserati Dealer in order to arrange for this recall action to be performed to your vehicle. The repair will take approximately 1.0 hour to complete. Please prepare to leave your vehicle with the dealership to allow the dealer to complete your repairs. Your Authorized Maserati Dealers have the necessary instructions and components to remedy your vehicle.

 

If the dealer fails or is unable to make the necessary repairs free of charge within a reasonable time, or if you have any problem obtaining the needed repair, you should inform the national headquarters of Maserati North America, Inc., at:

Maserati North America, Inc.
1 Chrysler Drive
Auburn Hills, MI 48326
(877) 696-2737 (Customer Care)

 

If you believe that Maserati has failed to remedy the defect described in this letter free of charge to you and within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration U.S. Department of Transportation, 1200 New Jersey Avenue, S.E., Washington DC 20590; or call the toll- free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to  https://www.safercar.gov.

Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten working days. If you no longer own this vehicle or your address has changed, please complete the enclosed prepaid yellow card and return it to Maserati North America, Inc.

 

We apologize for any inconvenience this may cause you.

Sincerely,

Maserati North America, Inc. Vehicle Safety and Regulatory Compliance

 


Q&A

Management Summary of Maserati Safety Recall Campaign #387

Headlight Adjustment

Date: July 2019
Subject: Maserati Safety Recall Campaign #387 – Headlight Adjustment
Models: Maserati Levante Model Year 2019
Countries Involved: World wide
Local Authorities: NHTSA / Transport Canada
Defective Part: N/A
Defect: Levante vehicles equipped with the optional full LED headlights with Adaptive Front Lighting System (“AFLS”) did not have the AFLS properly adjusted (aimed) during the vehicle assembly process.
Responsibility: Maserati S.p.A., MNA and Maserati Canada
Repair action: Check and adjust (aim) the LED headlights with Adaptive Front Lighting System (“AFLS”)
Repair Time: Approximately 1.0 hour
Vehicles Involved: 427 U.S. and 40 Canadian vehicles
Production Period: 7/4/2018 through 02/20/2019
Accidents/Injuries: None reported
Customer Contact: Customers will be notified by first class mail.

 

Q&A

 

 

Q1. Which models are affected by this recall?
A. 2019 Model Year Maserati Levante models equipped with full LED headlights with Adaptive Front Lighting System (“AFLS”)

 

Q2. Why are other models not affected?
A. Other Model Year 2019 Levante vehicles are not equipped with the full LED headlights with Adaptive Front Lighting System (“AFLS”) or if If equipped, were not built during the affected period.

 

Q3. How many vehicles in North America are affected?
A. There are a total of 427 U.S. vehicles and 40 Canadian vehicles potentially affected.

 

Q3a. How many vehicles globally are affected?
A. There are approximately 8,491 vehicles that are affected globally.

 

Q4. What is the specific problem?
A. Vehicles equipped with the optional full LED headlights with Adaptive Front Lighting System (“AFLS”) did not have the AFLS properly adjusted (aimed) during the vehicle assembly process.

 

Q5. What can happen?
A. Headlights adjusted above the maximum gradient allowed may impair the vision of drivers of other vehicles.

 

Q6. Can the driver become aware of the problem?
A. Yes. The headlights will appear to project a beam that is too high.

 

Q6a. What should I do if I notice this condition in my vehicle?
A. Bring your vehicle to the nearest authorized Maserati dealership. The recall will be performed free of charge.

 

Q7. What corrective measures will be taken?
A. The headlights will be adjusted and aimed correctly.

 

Q8. How did Maserati become aware of the problem?
A. After a vehicle quality analysis and investigation by Maserati, the issue was identified and corrective actions initiated.

 

Q9. Is Maserati aware of any accidents or injuries associated with the recall?
A. Maserati is not aware of any accidents or injuries related to this recall.
Q10. Can customers continue to drive their cars?
A. Yes, but we recommend that you take your car to the nearest dealer as soon as possible to have the recall performed.

 

Q11. How will customers be informed of the recall?
A. Customers will be notified by first class mail. Customers can also use the VIN recall lookup feature in Maserati’s website under Tools and Services:

https://www.maseratiusa.com/maserati/us/en/shopping-tools/recall-by-vin.

 

Q12. How will the recall be performed?
A. The authorized Maserati dealership will adjust the aiming of the front headlights

 

Q13. How long will the repair take?
A. To adjust the aiming of the front headlights, approximately 1 hour. Please plan, however, to leave your vehicle with the dealership to allow the dealer some flexibility for scheduling your repairs.

 

Q14. How many vehicles have experienced this problem?
A. To date, none have been reported in North America.

 

Q15. When will I receive my owner notification letter?
A. Within 60 Days. If a customer provides a VIN to MNA Customer Service, the need for a recall can be confirmed.  Customers can also use the VIN recall lookup feature in Maserati’s website under Tools and Services:

https://www.maseratiusa.com/maserati/us/en/shopping- tools/recall-by-vin.

Q16. Do I have to wait for my recall letter in order to have my recall performed?
A. No, you can call the authorized Maserati dealership and they will advise you when to make the repair. Alternatively, we (Customer Care) can conference you into your dealership to make the appointment now.

 

Q17. Is it safe to drive my vehicle?
A. Yes, but we recommend that you take your car to the nearest dealer as soon as possible to have the recall performed.

 

Q18. When did the factory make the change to the headlight adjustment which is causing the recall?
A. The factory made the change during 2019 MY production.

 

Q19. How do I know that my car is not affected by this recall?
A. A dealer can verify via VIN and individual inspection. Customers can also use the VIN recall lookup feature in Maserati’s website under Tools and Services.

https://www.maseratiusa.com/maserati/us/en/shopping-tools/recall-by-vin

 

Q20. Is NHTSA forcing Maserati to recall these vehicles?
A. No.  We are voluntarily recalling the affected vehicles.

 

Q21. Who is the supplier?
A. We don’t discuss supplier relationships in this context.

 

 


IMPORTANT SAFETY RECALL INFORMATION   

 

July 29, 2019

NHTSA Recall#: 19V521
Maserati Campaign#: 387

 

Dear Maserati Dealer:

This notification is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Maserati S.p.A. and Maserati North America, Inc. (MNA), have decided that a noncompliance to Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, Reflective Devices, and Associated Equipment,  exists in 2019 Model Year Maserati Levante vehicles.

Maserati S.p.A. and MNA have determined that the above-described vehicles were manufactured with the optional full LED headlights with Adaptive Front Lighting System (AFLS) that may not have had the AFLS properly adjusted during the vehicle assembly process. Headlights adjusted above the maximum gradient allowed under FMVSS No. 108 may impair the vision of drivers of other vehicles, and may increase the risk of a vehicle crash without prior warning.

The remedy is to adjust the light beam on the affected vehicles.  The remedy will be performed free of charge to the vehicle owner.  We will, of course, reimburse you for the labor necessary to carry out this recall campaign.  The necessary components for this recall are currently available to dealers, and owners will be directed to call their dealers for repairs.

Maserati dealers must ensure safety recalls are completed after having been notified by MNA that a safety-related defect or noncompliance exists in any motor vehicle or item of replacement equipment in the dealer’s possession at the time of notification. In MNA’s case, this notification would typically be made by the issuance of a safety recall notification in the form of a Technical Bulletin.  

Under the National Traffic and Motor Vehicle Safety Act of 1966, as amended, if a safety recall campaign is announced by MNA, dealers must ensure that all recalls on new vehicles and new items of replacement equipment are completed BEFORE delivery to the consumer. This means that dealers may not legally deliver new motor vehicles or new items of replacement equipment to consumers with an open safety recall.

The Safety Act also prohibits dealers from selling or leasing the motor vehicle or item of replacement equipment, unless and until the open safety recall has been completed BEFORE delivery.

Under the terms of the Certified Pre-Owned (“CPO”) program, CPO vehicles with an open safety recall may not be sold or delivered to the consumer.

Finally, MNA dealers should not sell or use parts that have been recalled by MNA. Please follow the specific instructions provided by MNA on the return or disposition of the parts.

Obviously, if you have any of the affected vehicles in your stock, you must not sell them until you have performed the necessary repairs on the vehicle. If you have already sold any of the vehicles with the indicated VIN in the enclosed instructions and have not yet sent in the new owner information to MNA, please do so at once so we may notify these owners.

 

Thank you for your cooperation.

 

Sincerely,
Maserati Vehicle Safety and Regulatory Compliance

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
MASERATI LEVANTE 2019

 


9 Associated Documents

Recall Acknowledgement

RCAK-19V521-9970.pdf 244.865KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.13 KB]

 


Manufacturer Notices(to Dealers,etc) Q&A for Maserati Safety Recall Campaign #387 – Headlight Adjustment for Levante Model Year 2019.

RCMN-19V521-1104.pdf 62.477KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [61.01 KB]

 


Non-Compliance Notice 573 Report

RCLRPT-19V521-1859.PDF 213.898KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.88 KB]

 


Recall Quarterly Report #1, 2019-3

RCLQRT-19V521-6855.PDF 211.147KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Recall Quarterly Report #3, 2020-1

RCLQRT-19V521-2780.PDF 211.329KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Remedy Instructions and TSB

RCRIT-19V521-3610.pdf 3824.13KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [3.65 MB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V521-4942.pdf 159.273KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [155.54 KB]

 


Recall Quarterly Report #2, 2019-4

RCLQRT-19V521-4047.PDF 211.249KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.30 KB]

 


Manufacturer Notices(to Dealers, etc.) A noncompliance to Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, Reflective Devices, and Associated Equipment, exists in 2019 Model Year Maserati Levante vehicles.

RCMN-19V521-0687.pdf 52.876KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [51.64 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V521&docType=RCL

 


 

SaleBestseller No. 1
Philips H11 VisionPlus Upgrade Headlight Bulb with up to 60% More Vision, 2 Count (Pack of 1)
  • Get up to 60% more vision on the road compared to a standard minimum legal requirements in low beam headlamp test results
  • Choose Philips VisionPlus headlights for superior quality with enhanced visibility. Base: PGJ19-2
  • Original equipment quality seal for the most reliable performance
  • All Philips upgrade headlights are DOT compliant
  • Headlight bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
SaleBestseller No. 2
AUTOONE Upgraded 9005 LED Headlight Bulbs, 22000 Lumens 600% Brighter, 6500K Cool White, 35W 9005 Headlight Bulbs, Super Bright HB3 9005 LED Bulb, Easy Installation, Long Lifespan
  • Great Brightness - Up to 22000 lumens, AUTOONE 9005 led headlight bulbs are 600% much brighter than other ordinary 9005 Halogen or LED bulb. It also provides illumination further down the road, and let you drive safer in the dark night. High-quality bulbs have pretty clear vision along the street.
  • Easy installation - Just plug and play. 100% same size as factory OEM lamps, precisely mimics the light position of factory halogen bulbs' filament. AUTOONE 9005 LED headlight bulbs are perfect replacements for your stock lamps, only a few minutes to pull them in.
  • 50000 Hours Lifespan - Effective cooling system is equipped in aluminum lamp body, which brings solid basic to its long lifetime. IP68 waterproof design keeps dusts and liquids out, enables you to drive with confidence in all environments with our 9005 headlight bulbs.
  • Inner decoder - No dashboard warning or modification. No flashing error either. Canbus ready for 98% of vehicles and avoid radio reference. For some sensitive vehicles, we have some decoders to send, please contact us if you have any need for these 9005 led bulb.
  • 1:1 Perfect Beam Pattern - The ultra-thin copper plate design brings AUTOONE 9005 hb3 LED headlight bulbs closer to the glowing area of halogen bulb, ensuring 360° illumination with no black spots. The clear cut-off line won’t blind oncoming traffic and ensure safe driving.
SaleBestseller No. 3
SYLVANIA - H11 XtraVision - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb (Contains 2 Bulbs)
  • Perfect Bulb Replacement: If one bulb burns out, the other isn't far behind. Replace your H11 XtraVision Halogen bulbs in pairs for optimum performance.
  • Super Bright & Easy to Install: XtraVision bulbs have an enhanced downroad visibility with no added glare.
  • DIY Fix for High Quality Performance: XtraVision bulbs have a robust filament design and proprietary gas mixture that can be driven for superior performance in many vehicles.
  • Durable High Beam for Maximum Visibility: XtraVision bulbs are designed and manufactured to improve your driving situation while providing maximum durability.
  • The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
Bestseller No. 4
OXILAM 2024 Upgraded H4 9003 LED Bulb, 20000LM 600% Brighter, 1:1 Halogen Size 6500K Xenon White Plug and Play Wireless HB2 LED bulb, Pack of 2
  • 【600% Brighter Than Halogen】H4 LED bulbs has 24 pieces of high quality chips, providing a super high brightness of 20,000LM per set, which is 6 times brighter than the stock bulb. Without the need for additional projection lenses, you'll have a brighter, clearer field of vision, spotting animals or other obstacles on the road earlier and effectively improving nighttime driving safety.
  • 【5 Quick Minutes Installation】OXILAM 9003 led bulb is the same size as the halogen bulb and has an all-in-one design without external drivers or additional wiring harnesses, which allows them to be plug and play like OEM bulbs, with no modifications and 100 % free of installation problems.
  • 【10 Years+ Long Lifespan】The H4 LED bulb features a unique top 12000PRM silent fan design, which is closer to the chip, enabling more efficient heat dissipation. The combination of an all-aluminum body and high-quality copper plate ensures the bulb's lifespan exceeds 10 years, performing optimal brightness without the issue of other LEDs dimming over time.
  • 【1:1 Factory Beam Pattern】The 0.03-inch ultra-thin base plate gives the 9003 bulbs to have the same beam pattern as factory bulbs. With light focusing on the road, they create a clear cutoff line without any black spots or shadowed areas, effectively preventing glare to oncoming vehicles or drivers.
  • 【99% Vehicles Error Free】The H4 9003 HB2 led bulb built-in intelligent IC driver, provides power closer to stock bulb, suitable for 99% of vehicle computer systems, no error or radio interference, effectively reduce the probability of DRLs flicker or fog lights do not light up problem. But for some an sensitive models may need extra decoder, please contact OXILAM via Amazon mail for help.
SaleBestseller No. 5
SEALIGHT 9007/HB5 LED Bulbs, 9007 LED Dual Beam Bulbs, 22000 LM 9007 LED White Light, 600% Super Bright Light Bulbs,Plug-N-Play, Pack of 2
  • High Brightness: 9007 led bulbs are 6 times brighter than halogen bulbs, providing whiter clearer wider driving vision, helping you to see the deer and wild animals in advance to ensure safer nighttime driving
  • 10 Minutes Installation: 9007 led bulbs 1:1 design with halogen bulbs, plug-and-play, Non-polarity socket, easy to install without any modification
  • 20 Year Lifetime: 9007 led bulbs Lifetime is 60 times longer than the stock lamp because of utilizes an advanced heat sink measuring just 0.72 inches and features a driver for increased performance. Also, 9007/HB5 light bulb has been rigorously tested for durability and Waterproof
  • 1:1 Halogen: The refraction focusing design ensure a focus light, which is fantastic coverage directly in front of vehicle with clearer dividing line. No dazzle, no dark spots to oncoming driver, safe and reliable
  • Sealight bulbs can fit 99% vehicles without CANbus adapter: but for some vehicles, computer system may be sensitive and send error message for any aftermarket bulbs. To solve the issue, an additional CANbus Decoder is needed to make the bulb perform well
Bestseller No. 6
Philips H7 VisionPlus Upgrade Headlight Bulb with up to 60% More Vision, 2 Pack
  • Get up to 60% more vision on the road compared to a standard minimum legal requirements in low beam headlamp test results
  • Choose Philips VisionPlus headlights for superior quality with enhanced visibility
  • Original equipment quality seal for the most reliable performance
  • All Philips upgrade headlights are DOT compliant
  • Headlight bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
SaleBestseller No. 7
AUTOONE H11 H9 H8 LED Bulbs 6000K White Fanless Mini Size Halogen H11 H16 Fog Light Replacement, Canbus Ready Direct Fit, Pack of 2
  • 【Huge Improvement in Visibility】-AUTOONE H11 led bulbs are equipped with high luminous efficacy CSP chips. And 1:1 halogen h11 bulbs’ beam pattern, spread out the light more to help in the side and front vision but no endangering other drivers. Safer and bright upgrade for forward lights
  • 【Advanced and Ingenious Design】-No plastic plug, won't detach from the plug or get loose compared to other H11 fog light. Ensure AUTOONE H11 led lights more reliable and durable. -Fanless design, no worry about the fan noise or fan’s out issuse. Plus IP67 feature, avoid the dirt, wet inhale in driving. Those H11 led light fog light will work perfectly on most severe weather
  • 【Less 10 Mins Easy Installation】- All-in-one wireless mini size H11 led light bulb. No bulky and extended bulb base, no external driver. Real plug and play, smoothly fits into vehicle's housing and factory sockets even with limited space in original housing
  • 【More than 50,000Hr Longer Lifespan】-AUTOONE led h11 bulbs use less power than halogen bulbs which means produce less heat. With whole aluminum body and temperature control element, the h11 led will operate in a normal working temp range and produce continuous lighting without damage shortly
  • 【Built-in Driver and Canbus Ready】-Those h11 h8 h9 led bulbs are CANBUS design, fit 99% vehicles without error or flickering issue. But some sensitive models may still require canbus decoder. Autoone can send the resistor directly if you need
SaleBestseller No. 8
AUXITO H4 LED Bulbs, 15000LM Per Set 400% Brighter 9003 HB2 Fog Lights 6500K Cool White for Halogen Replacement, Plug and Play, Pack of 2
  • Better Visibility at Night: AUXITO H4 led light bulb uses double sided ZES chips, giving 15,000lm light output per set. 6500K cool white offers better visibility at dark nights. 400% brighter than stock bulbs. Compatible with H4, 9003 and HB2 socket
  • NO Blinding & Dazzling: Same beam pattern with original halogen bulbs. The size and position of the LED chips are close to the filament in the halogen bulbs, so AUXITO H4 LED fog light bulbs work well in the stock housings, no dark spot and no blinding oncoming vehicles
  • 10 Minutes Easy Installation: Easy to install. Directly plugged wireless design, do not have external driver or connector, non-polarity socket, make the 9003 led bulbs plug and play like halogen bulbs
  • 30,000 Hours Lifespan: Whole aviation aluminum lamp body, 12,000RPM high speed cooling fan, and IP65 waterproof rate ensure more than 30,000 hours continuous lighting, even in raining days or other bad weather
  • Canbus Ready and Error Free: AUXITO HB2 led bulbs built in intelligent IC driver, compatible with 99% of computor system. No radio interference, no flickering or error code.
SaleBestseller No. 9
SYLVANIA - H11 SilverStar - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb, Brighter Downroad with Whiter Light (Contains 2 Bulbs)
  • Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your H11 SilverStar Halogen bulbs in pairs for optimum performance.
  • More Downroad Visibility: SilverStar halogen headlights create a whiter light with more downroad visibility that will enhance your overall experience on the road at night.
  • Whiter Light For Added Clarity: The combination of down-road, side road, and whiter light achieves more clarity during nighttime driving. More clarity improves contrast and makes it easier to see objects on and along the side of the road.
  • Reliable Design For Optimal Performance: SilverStar has a specially designed filament, propriety halogen gas mixture, and a unique lamp coating that shifts the color temperature towards a whiter light.
  • The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
SaleBestseller No. 10
SYLVANIA - H7 SilverStar Ultra - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb, Brightest Downroad with Whiter Light, Tri-Band Technology (Contains 2 Bulbs)
  • Lights Dim Over Time, Replace In Pairs: Be sure to replace both H7 headlights at the same time for optimum performance. If one bulb burns out, the other isn't far behind. Replacing in pairs allows for premium visibility
  • Brightest H7 Headlight Equals Most Downroad Visibility: See all aspects of the road better with Sylvania's premium headlight bulbs, the Ultra Night Vision performance headlight
  • Whiter Light For Added Clarity: Patented Tri-Band Technology helps provide the whitest H7 light compared to Sylvania OE bulbs. Improve contrast and object visibility such as street signs and road hazards
  • Sleek Style and Improved Safety At Night: Replace your standard H7 bulb for this bright white halogen headlight that will increase your vehicles night time driving experience
  • The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket

Last update on 2024-03-21 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...